Trust Computer Products Home Security System 140BM User Manual

140BM LCD WIRELESS OBSERVATION  
SYSTEM  
U K  
User’s manual  
V1.0  
L I F E I S M O R E ! T R U S T U S  
T R U S T . C O M  
 
140BM LCD WIRELESS OBSERVATION  
SYSTEM  
Fig. 1  
Fig. 2  
Fig. 3  
Fig. 4  
Fig. 5  
Fig. 6  
L I F E I S M O R E ! T R U S T U S  
T R U S T . C O M  
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
Instructions when using for the first time  
Chapter  
1.  
2.  
Installing the camera and the monitor  
Reception quality  
(4.3)  
(4.6)  
!
U K  
1
Introduction  
This instruction manual is for users of the TRUST 140BM LCD WIRELESS  
OBSERVATION SYSTEM. This device can be used as an observation system, for  
example, for your baby. This device works using radio frequencies and, therefore,  
does not require any cables.  
Advantages:  
Transmits wireless audio and video signals from the camera.  
The 2.4 GHz FM signal passes through walls, floors and ceilings.  
Can be expanded using other Trust Convenience products (see  
2
Safety  
Carefully read the following instructions before use:  
1.  
2.  
Do not use this device in a damp environment such as a bathroom, damp  
basement, swimming pool, etc.  
Never insert objects into the holes on the outside of this device, because you  
may touch live components. This may cause a fire or give you an electric  
shock.  
3.  
Do not try to repair this device yourself. If you open or remove the casing,  
you may accidentally touch live components. There are also other risks if  
you open or remove the casing.  
4.  
5.  
Position the device so that the cables cannot be damaged.  
The camera’s IR LED’s and the wireless transmitter are not harmful to  
humans.  
6.  
7.  
Keep all components out of the reach of children.  
Fingerprints or dirt on the lens may affect the performance of the camera.  
Avoid touching the lens with your fingers.  
8.  
9.  
Do not use the device in a dirty or dusty environment.  
Only use this device with the power adapter provided or with the type of  
batteries indicated.  
10.  
11.  
The frequencies used are for general use. It is possible for the video and  
audio signals to be detected by others. In order to protect your privacy, it is  
recommended to turn the camera off when it is not being used.  
Do not use old batteries and new batteries together. This may damage the  
device.  
1
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
3
Approval  
0678  
-
This device meets the essential requirements and other relevant conditions of the  
applicable European directives. The Declaration of Conformity (DoC) is available  
-
-
The device has been approved in accordance with RF CE0678  
.
This wireless device works at a frequency of 2.434 ~ 2.473 GHz. It meets the  
essential requirements and other relevant conditions of R&TTE Directive  
1999/5/EC and can be used in the following countries.  
AT/BE/DK/FI/FR/DE/GR/IE/IT/LU/NO/PT/ES/SE/CH/NL/UK/HU/CZ/SK/PL.  
The following limitations are applicable for certain countries.  
France -> only channel 2 may be used if the device is used outdoors.  
(All three channels may be used if the device is used indoors.)  
There may be restrictions for the use of this device outside of the EU. If this device  
is used outside of the EU, check whether this device meets local regulations.  
Frequencies: 2.434 ~ 2.473 GHz. Bandwidth: 20 MHz. Transmitting power: 10  
mW.  
-
-
4
Installation  
4.1  
Preparing for installation  
The connections on the monitor are given in table 1 and figure 1.  
Item  
A
Description  
Comments  
6 Volt power adapter for the  
monitor.  
The voltage is shown on the label on  
the adapter.  
Monitor’s power adapter  
connection.  
B
C
Extra:  
For viewing the camera image on a TV  
or to record the camera image on a  
VCR.  
Scart connection  
Monitor’s audio/video  
connection  
D
Table 1: Monitor connections  
The connections and switches of the camera are given in table 2 and figure 2.  
Item  
E
Description  
Comments  
9 Volt power adapter for the  
camera.  
The voltage is shown on the label on  
the adapter.  
Camera’s power adapter  
connection.  
F
On/Off/Night mode switch  
Channel selection switch  
Power indicator  
G
H
I
Is lit when the camera is turned on.  
Table 2: Camera connections  
The monitor settings and options are given in table 3 and figure 3.  
2
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
Item  
A
Description  
Comments  
Level button  
Sets the sound level for the Auto mode. When  
using the Auto mode, the monitor turns on  
automatically when the set sound level is  
exceeded.  
U K  
Power/volume button  
Turns the sound on and off and adjusts the  
sound level.  
B
Auto switch  
Turns the Auto mode on and off.  
C
D
E
F
Channel indicator  
Power indicator  
Lights up for the chosen channel.  
Is lit when the monitor has been turned on.  
Channel selection  
switch  
Brightness buttons  
Attachment points  
Adjusts the brightness.  
G
H
Use these to attach the monitor to an  
attachment plate or wall.  
Battery cover  
If necessary, insert four AA batteries here.  
I
Table 3: Monitor components  
The camera settings and options are given in table 4 and figure 4.  
Item  
J
Description  
Comments  
Infrared LED’s  
Makes it possible to receive clear  
images in dark conditions when in the  
Night mode.  
Lens  
Records the image.  
K
L
Lens ball  
Used to alter the vertical viewing  
angle.  
Microphone  
Records the sound.  
M
N
Attachment points  
Use these to attach the camera to an  
attachment plate or wall.  
Battery cover  
If necessary, insert four AA batteries  
here.  
O
Table 4: Camera components  
4.2  
Inserting the batteries (optional)  
You can use batteries (not included) if you do not wish or are not able to use the  
power adapter for the camera or the monitor. Use AA batteries.  
1.  
Remove the battery cover (A) on the rear of the monitor or the rear of the  
camera (see figure 5).  
2.  
Insert the batteries as indicated inside the battery compartment (B).  
3.  
Close the battery flap.  
Note:  
Inserting the batteries incorrectly may cause damage.  
Only use alkaline or rechargeable NiMH batteries (type AA). The  
image quality and the transmission range are reduced when the  
battery power is reduced. It is, therefore, recommended to use the  
power adapter whenever possible.  
If you use batteries, it is recommended to change these or charge  
them regularly.  
3
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
4.3  
Connecting  
1.  
Connect the 6 Volt power adapter to the monitor (A and B, figure 1) and the 9  
Volt power adapter to the camera (E and F, figure 2).  
2.  
3.  
Switch the camera to channel 1 using switch H (see figure 2).  
Turn the camera on (On or Night) using the switch (G, figure 2). The voltage  
indicator (I, figure 2) will be lit.  
Note:  
4.  
If you turn the camera on in the Night mode, the image displayed on  
the monitor (or a possible TV or video) will be black-and-white.  
Turn the monitor on by rotating the PWR/VOL button (B, figure 3). Adjust the  
volume as required. A click will be heard and felt and the voltage indicator (E,  
figure 3) will be lit.  
5.  
Set the monitor to channel 1 by pressing the switch (F, figure 3) a number of  
times until the channel indicator (D, figure 3) is lit. You will now see the image  
detected by the camera.  
6.  
7.  
8.  
Adjust the brightness of the image as required using the brightness buttons  
on the monitor (G, figure 3).  
Optional: connect the Scart cable to the monitor and the VCR (C and D, figure  
1). The image detected by the camera can now be recorded.  
The security system is now operational.  
4.4  
Extra functionality  
To save energy, this system has an Auto mode (C, figure 3). The monitor will be  
turned on if noise is detected by the microphone on the camera.  
1.  
Adjust the noise sensitivity level as required using the level button (A, figure  
3).  
Note: The noise sensitivity level can be adjusted from level 1 to level 9. Level 1 is  
the least sensitive and level 9 is the most sensitive.  
2.  
Press the Auto button on the monitor (C, figure 3). The monitor will be turned  
off.  
3.  
When the noise detected by the microphone on the camera reaches the set  
sensitivity level, the monitor will turn on automatically.  
The monitor will turn off automatically as soon as the noise level drops below  
the set noise sensitivity level for an uninterrupted period of 1 minute.  
The Auto mode has no effect on the choice of channel.  
If you use the Auto mode, the image will still be transmitted via the  
monitor’s AV-out connection to a VCR or TV which may be connected  
to the scart connection.  
4.  
Note:  
4.5  
Positioning and use  
1.  
Use the attachment aids to attach the camera and/or the monitor to a wall,  
etc. (see figure 6).  
2.  
When positioning the camera, keep the wiring and the camera out of the  
reach of children and babies.  
4.6  
Reception quality  
1.  
The reception from the camera depends on the number of walls, doors, floors,  
ceilings, etc. between the monitor and the camera. Metal and constructions  
containing metal can also considerably reduce the range and quality of the  
4
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
signal. Therefore, in order to have the best possible reception, try to avoid  
these obstacles as much as possible.  
2.  
3.  
People walking near the transmitter or receiver (particularly between the two)  
may also reduce the quality of the reception.  
Try to achieve the best possible reception by positioning the camera and the  
monitor correctly in relation to each other. Both devices have built-in aerials.  
The aerials can be directed by moving the devices.  
U K  
4.  
The device may be affected by external sources of interference, such as  
microwave ovens, the weather and other devices which use the same  
frequency as this device. If possible, turn these devices off when using the  
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM.  
4.7  
Expanding the wireless security system  
If you have several black-and-white or colour cameras and/or receivers, you can use  
these to expand your wireless system. For these additional cameras and/or receivers  
to function correctly, they must to be connected to the system and operate on the  
same frequency (signal). A maximum of 3 wireless cameras can be connected to the  
monitor. There is no theoretical limit to the number of receivers which can be added  
to the system.  
This monitor is ideal for use with other TRUST CONVENIENCE products. See the  
connected to this monitoring system, you must manually switch between the  
channels.  
5
Troubleshooting  
Problem  
Cause  
Possible solution  
The power supply has not been Check whether the power  
No image on the  
monitor.  
connected.  
supply has been connected  
to the monitor and the  
camera correctly.  
The batteries have been  
inserted incorrectly.  
Reinsert the batteries  
The batteries in the camera  
and/or the monitor are empty.  
Replace the batteries.  
Another RF device is operating  
on the same channel as the  
TRUST 140BM LCD  
Change the channel of both  
the camera and the receiver.  
WIRELESS OBSERVATION  
SYSTEM.  
Change the physical location  
of the camera (transmitter)  
and/or the receiver by  
altering the direction or the  
distance.  
The camera is set up in a dark  
room and the Night mode has  
not been selected.  
Select the Night mode on  
the camera.  
The monitor has been set to  
the Auto mode.  
Turn off the Auto mode or  
adjust the noise sensitivity  
level.  
5
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
Problem  
Cause  
Possible solution  
The batteries in the camera  
and/or monitor are empty.  
Replace the batteries in the  
camera and/or monitor.  
The monitor and the camera  
are in different rooms and one  
of these rooms (or both) is  
surrounded by a metal  
construction.  
Position the monitor and/or  
the camera in a different  
room which is not  
surrounded by the metal  
construction.  
The built-in aerials are not  
directed at each other correctly. of the camera or monitor.  
Change the physical location  
There is noise on  
the image and/or  
the sound.  
Turn the camera and/or the  
monitor until the image  
becomes sharp.  
The transmission range is  
restricted by objects, e.g.  
people, walls, etc.  
Change the physical location  
of the camera or monitor.  
The camera and the monitor  
are too far apart.  
Place the camera and the  
monitor closer together.  
The wrong channel has been  
selected.  
Set the camera and the  
receiver to the same  
channel.  
The channel is being used by  
another device.  
Select a different  
transmitting and receiving  
channel.  
The signal is affected by an  
external source of interference.  
Select a different  
transmitting and receiving  
channel.  
Turn off or remove the  
source of interference.  
The power adapter plug has not Insert the plug correctly into  
The camera  
suddenly stops  
working.  
been plugged in correctly.  
the camera and/or the  
monitor.  
The latest FAQs are available  
on the Internet.  
for FAQ’s and other product  
information.  
The problem is  
not listed here.  
guarantee and service support, such as up-to-date FAQ’s. You will be automatically  
informed of developments to your product and other Trust products. You will also  
have the chance of winning some spectacular prizes.  
If you still have problems after trying these solutions, please contact one of the Trust  
Customer Care Centers. You can find more information at the back of this instruction  
manual. Please have the following information available:  
The item number. This is 13816 (European model) or 13817 (UK model).  
A good description of what does not work.  
A good description of when the problem occurs.  
6
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
6
Specifications  
6.1  
Wireless range  
The system has been tested in the open field using both power adapters (not with the  
batteries). The maximum distance at which the image and sound signals are still  
acceptable is 100 m.  
U K  
The system has been tested indoors using both power adapters (not with the  
batteries). The signals can be transmitted a distance of 20 metres with only one  
concrete floor (no walls, etc.) between the camera and the monitor.  
In the Night mode, the camera can record clear images in an unlit area up to a  
distance of 2.5 metres.  
The system has been tested with rechargeable 1800 mAh NiMH batteries. The  
monitor will work for approximately 4 hours in the Normal mode with maximum  
brightness. The camera will work for 8 hours in the Night mode. The distance  
between the camera and the monitor was 10 metres.  
Note:  
Depending on the circumstances in which the camera and monitor are  
used, the measured distances and times are no guarantee for this  
device.  
6.2  
Technical information  
The table below gives the technical specifications for the monitor and the camera.  
Description  
Response  
RF / 2.434 ~ 2.473 GHz  
Wireless technology [RF, IR, … +  
frequency]  
2.434 / 2.453 / 2.473  
CMOS 1/3”  
FM  
Frequency per channel [GHz] [1 / 2 / 3]  
Optical module [CCD / CMOS / ...]  
A/V modulation/demodulation method  
Lens viewing angle  
45°  
f 6.0 mm, F1.8  
1.5 inch  
Lens focal distance  
Monitor screen size  
117,600 pixels  
Colour  
Number of pixels for the monitor  
Monitor screen type  
100 m in free space using the  
power adapter provided.  
Maximum wireless distance between the  
camera and the monitor (metres)  
20 m in a closed space with a  
maximum of 1 obstacle using the  
power adapter provided.  
RF approval no. (CE xxxx !)  
Other outputs  
CE0678  
A/V out on monitor  
PAL: 628 (H) x 582(V)  
Camera resolution ... x ...  
Power supply  
Monitor: JAD0600600E Input  
230VAC 50 Hz / Output 6VDC  
600mAh  
7
 
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM  
Camera: JAD0900300E Input 230  
VAC 50 Hz / Output 9 VDC 300  
mAh  
PAL  
Video output signal  
Camera 123 x 92 x 59  
Monitor 140 x 85 x 53  
Camera 175 g (excluding batteries)  
Monitor 240 g (excluding batteries)  
Product size [HxWxD] (mm)  
Weight (kg)  
7
Warranty conditions  
-
Our products have a two-year manufacturer's warranty which is effective from the  
date of purchase.  
-
-
-
-
If there is a fault, return the product to your dealer and include a description of the  
fault, the proof of purchase and all the accessories.  
During the warranty period, you will receive a similar product, if one is available. If  
no similar product is available, your product will be repaired.  
Please contact our help desk for missing components, such as the instruction  
manual, software or other components.  
The warranty becomes invalid if the product has been opened, if there is  
mechanical damage, if the product has been misused, if alterations have been  
made to the product, if the product has been repaired by a third party, in the case  
of negligence or if the product has been used for a purpose other than that  
originally intended.  
-
-
Excluded from the warranty:  
Damage caused by accidents or disasters, such as fire, flood, earthquakes,  
war, vandalism or theft;  
Incompatibility with other hardware/software which is not stated in the  
minimum system requirements;  
Accessories such as batteries and fuses (where applicable).  
Under no circumstances will the manufacturer be held responsible for any  
incidental or consequential damage, including the loss of income or other  
commercial losses resulting from the use of this product.  
8
 
CUSTOMER CARE CENTERS  
Residents in the UK and Ireland should contact:  
UK Office  
Phone  
Fax  
Mon - Fri  
From 8:00 - 16:00  
+44-(0)845-6090036  
+31-(0)78-6543299  
I residenti in Italia possono contattare:  
lun - ven  
9:00 - 13:00 /  
14:00 -18:00  
Ufficio italiano  
Telefono  
Fax  
+39-051-6635947  
+39-051-6635843  
Les habitants de la France et de l’Afrique du Nord peuvent contacter :  
Bureau français  
Lundi-vendredi  
De 9:00 à 17:00  
Téléphone  
Fax  
+33-(0)825-083080  
+31-(0)78-6543299  
Kontaktadresse für Einwohner Deutschlands:  
Deutsche Geschäftsstelle  
Mo – Fr  
9:00 - 17:00  
Telefon  
Fax  
0800-00TRUST (0800-0087878)  
+31-(0)78-6543299  
Los habitantes de España pueden ponerse en contacto con:  
Oficina española  
lun – viernes  
De las 9:00 a las  
17:00 horas  
Teléfono  
Fax  
+34-(0)902-160937  
+31-(0)78-6543299  
Osoby mieszkające na terytorium Polski powinny skontaktować się:  
Biuro w Polska  
Tel  
Od pon. do pt.  
+48-(0)22-8739812  
+31-(0)78-6543299  
w godz 09:00-17:00  
Fax  
Inwoners van Nederland kunnen contact opnemen met:  
Kantoor Nederland  
ma – vr  
9:00 - 17:00 uur  
Telefoon  
Fax  
0800-BELTRUST (0800-23587878)  
+31-(0)78-6543299  
All other countries / Alle anderen Länder / Tous les autres pays  
Tutti gli altri paesi / Todos los demás países / Alle andere landen  
European Head Office  
Mon - Fri  
From 9:00 - 17:00  
Phone  
Fax  
+31-(0)78-6549999  
+31-(0)78-6543299  
L I F E I S M O R E ! T R U S T U S  
T R U S T . C O M  
 

TOA Electronics Home Theater Server D1440901 User Manual
Toshiba Cable Box 58L9300UC User Manual
TRENDnet Radio Antenna TEWAO08O User Manual
Tripp Lite Air Conditioner SRCOOL12K User Manual
Tripp Lite Surge Protector CCC4 User Manual
Tripp Lite TV Cables s456 003 User Manual
Troy Bilt Blower TB180b User Manual
Verizon Cell Phone GH68 36971A User Manual
Waste King Garbage Disposal WLC 100 User Manual
Weed Eater Lawn Mower 152336 User Manual